- Precedenta
- 1
- 2
- 3
- 5
- Urmatoarea
Bine cotat!

SHIMANO Dura Ace EW-WU111 Di2 ANT+ transmitter
The alien ET definitely would have liked the Shimano Dura Ace Di2 ANT+ transmitter. Even though ANT+ or Bluetooth connections do not reach from earth...
Bine cotat!

SHIMANO Di2 EW-SD50 cable
The thin Shimano Di2 EW-SD50 cable supplies all electronic Shimano components such as display, rear derailleur or front derailleur with electricity an...
Bine cotat!

SHIMANO SM-BCR2 Di2 charger
Special charge for an internal SM-BTR2 battery. To charge the battery, the SM-EW90 A or SM-EW90 B (or SC-M9050 for MTBs) interface is required (Juncti...
OFERTE

NuVinci NUVINCI N360/N380 Harmony H-SYNC Interface
Interface suitable for N360/380 rear hubs with electronic control (H-SYNC) via Bosch display. For chain and belt drive. · New version (barcode/SN bel...
Bine cotat!

SHIMANO Di2 EW-SD50 Kabel
Das dünne Kabel Shimano Di2 EW-SD50 versorgt alle elektronischen Shimano-Komponenten wie Display, Schaltwerk oder Umwerfer mit Strom und elektronische...

SHIMANO Di2 EW-RS910 Junction 2017
The Shimano Di2 EW-RS910 junction A is fitted inside the frame (down tube, check whether your frame is approved) or bar end. Thus allows you to route...
Bine cotat!

SHIMANO Di2 SM-BTR1 battery
· rechargeable · fully recharged in approx. 1,5 hours · fully recharged battery lasts for a distance of approx. 750 - 1000 km (depending on the weat...
Bine cotat!

SHIMANO Di2 SM-EW90-A Junction
The Shimano Di2 SM-EW90-A Junction serves as an interface between cockpit and Junction B. Three ports allow for a classic connection to Di2 STI shift/...
Bine cotat!

SHIMANO SM-CA70 shift cable adjuster
This small, handy adjusting tool allows precise adjustment of the rear derailleur from the handlebar - even when riding. The shift cable adjuster is s...
Bine cotat!

Birzman Spiral Housing Covers
With the spiral housing covers by Birzman you can protect your frame from scratches and abrasions caused by gear and brake cables. The durable rubber...

SHIMANO Di2 SM-JC41 junction
The Shimano Di2 SM-JC41 junction allows you to connect your Di2 components with each other inside the frame or down tube. The distributor serves as a...

Birzman Tube Tops Housing Covers 4mm/5mm
With housing covers by Birzman you can protect your frame from scratches and abrasions caused by gear and brake cables. The durable rubber covers are...
Bine cotat!

SHIMANO outer gear cable end caps
Shimano end caps for outer gear cables with a Ø 4 mm. · For Ø 4 mm · 10 pieces Manufacturer's ref.: Y-6ZA98010
Bine cotat!
Stoc redus!

SHIMANO end caps for outer brake cables
Shimano end caps for outer brake cables with an outer Ø of 5mm. · For Ø 5 mm · 10 pcs
Bine cotat!

SHIMANO Dura Ace shift cable stopper
· polished aluminium · with quick adjustment for the rear derailleur · with knurled nut to adjust the front derailleur · suitable for 4 mm and 5 mm...
Bine cotat!

SHIMANO aluminium shift cable ferrules
Prevent the cable ends from fraying. · Material: aluminium · For brake cables with Ø 1,2 mm Manufacturer's ref.: Y-62098060 (10 pieces), Y-62098030...
OFERTE

SHIMANO Ultegra Di2 SM-EW67A-E wire harness
Wire harness for external routing that connects the ST-6770 to the Junction SM-JC40/41 with an additionally required cable EW-SD50. The wire harness a...
Bine cotat!

Hartmann Teflon casing
Ingenious for exposed cables. Cover the bare cables with this Teflon casing and your gearshift or your brake is considerably more resistant to dirt a...
OFERTE

Xtreme front derailleur clamp
Clamp with load-capable design, to be mounted on Shimano and Campagnolo braze-on sockets. Please note: You need a special screw (item no. 562251) for...
Stoc redus!

SHIMANO Di2 SM-EW90-B Junction
The Di2 SM-EW90-B Junction serves as an interface between cockpit and Junction B. Five ports allow triathletes to integrated diverse additional switch...
- Precedenta
- 1
- 2
- 3
- 5
- Urmatoarea