B + M Briq-XL E Headlight with Curve Light and Bluetooth Remote

With up to 220 lux lighting power, switchable high beam and digital curve light, the Briq-XL E front light is positioned at the very top of the Busch und Müller e-bike product range.

The front light combines a large reflector with smart control electronics. This not only enables it to create a homogeneous and wide carpet of light with a sharp cut-off line on the road, but also outstanding energy efficiency and high durability.

Another special highlight is the digital curve light: It switches on sequentially depending on the handlebar angle and the angle of inclination of the bike, thus enabling dynamic illumination when cornering. At the same time, the light on the outside of the bend is reduced so you don’t dazzle oncoming traffic. Furthermore, there is a switchable high beam to enable anticipatory driving, especially when riding at speed. The range of features is rounded off with sensor-controlled daytime running lights.

The front light is controlled via the Bluetooth handlebar control unit with two buttons. You can choose from three pre-installed light modes at the touch of a button. There is also a fourth mode, which you can configure completely individually using the app and which can also be selected via the control unit.

Details:
• Powerful e-bike headlight with digital curve light
• Homogeneous and wide light range with up to 220 lux lighting power
• Digital curve light with tilt sensor and adaptive bend lighting
• Bright dipped beam with close-range illumination
• Switchable high beam for anticipatory riding
• Sensor-controlled daytime running light enables increased visibility
• Bluetooth handlebar control unit with two buttons (high beam, light mode)
• Three pre-installed light modes (city, road and off-road) selectable via the handlebar control unit
• Additional, freely configurable mode ("My mode")
• Control LEDs for high beam, curve light and bluetooth
• Robust aluminium lamp housing with lateral light outlets
• Sturdy aluminium mounting clamp
• According to German road traffic regulations (StVZO) approved for electric bikes limited to 25 km/h

Available for handlebar diameters:
• 31.8 mm
• 35 mm
Please indicate your choice.

Technical details:
• Material: aluminium (lamp housing, handlebar mount)
• Installation: handlebar mount for lamp body (Ø 31.8 mm or Ø 35 mm), handlebar mount for control unit (Ø 22.2 mm)
• Power supply: from 12 to 60 volts direct current
• Power consumption: 16 – 60 W
• Lamp: LED
• Lighting power: up to 220 lux
• Lateral visibility: yes
• Daytime lighting: yes
• Light modes: Dipped beam, curve light, high beam, daytime running light
• Light profiles: 4 (City, Road, Off-road, "My mode")
• Dimensions: approx. 74 x 94 x 64 mm
• Weight: approx. 320 g

In the box:
• 1 B+M Briq-XL E headlight
• 1 handlebar mount for Ø 31.8 mm or Ø 35 mm
• 1 Bluetooth handlebar control unit 


Note:
The front light is compatible with a direct current power source (DC) of 12 to 60 volts. Some e-bikes can provide this, but NOT all do!
The light connection of your drive system must provide a rated power of at least 16 watts to operate the headlight.
For the exact voltage supply of your e-bike lights, please check beforehand with the respective manufacturer.
NOT suitable for dynamo!
NOT approved for e-bikes with a speed above 25 km/h or speed pedelecs!
The connection cable of the front light has two open cable ends. Depending on the e-bike drive, these can be connected to the motor of your e-bike either directly or using a separately available, manufacturer-specific plug.

Tip:
You can find a replacement handlebar mount for handlebar Ø 31.8 mm under prod. code: 2351861.
 

Manufacturer: Busch & Müller KG, Auf dem Bamberg 1, 58540 Meinerzhagen, Germany, www.bumm.de/