B + M Briq-XL E Headlight with Curve Light

With up to 220 lux lighting power, switchable high beam and digital curve light, the Briq-XL E front light is positioned at the very top of the Busch und Müller e-bike product range.

The front light combines a large reflector with smart control electronics. This not only enables it to create a homogeneous and wide carpet of light with a sharp cut-off line on the road, but also outstanding energy efficiency and high durability.

Another special highlight is the digital curve light: It switches on sequentially depending on the handlebar angle and the angle of inclination of the bike, thus enabling dynamic illumination when cornering. At the same time, the light on the outside of the bend is reduced so you don’t dazzle oncoming traffic. Furthermore, there is a switchable high beam to enable anticipatory driving, especially when riding at speed. The range of features is rounded off with sensor-controlled daytime running lights. The front light is controlled via the wired handlebar control unit. You can use it to switch both the high beam and the entire headlight on and off.

Via an optional app, you can also choose from three pre-installed light modes. There is also a fourth mode that you can configure completely individually. You select the mode of the headlight via the app.

Details:
• Powerful e-bike headlight with digital curve light
• Homogeneous and wide light range with up to 220 lux lighting power
• Digital curve light with tilt sensor and adaptive bend lighting
• Bright dipped beam with close-range illumination
• Switchable high beam for anticipatory riding
• Sensor-controlled daytime running light enables increased visibility
• Wired handlebar control unit (high beam, on/off)
• Three pre-installed light modes (city, road and off-road) selectable via app
• Additional, freely configurable mode ("My mode")
• Control LEDs for high beam, curve light and bluetooth
• Robust aluminium lamp housing with lateral light outlets
• Sturdy aluminium mounting clamp
• According to German road traffic regulations (StVZO) approved for electric bikes limited to 25 km/h

Technical details:
• Material: aluminium (lamp housing, handlebar mount)
• Installation: Handlebar mount for lamp body (Ø 31.8 mm), handlebar mount for control unit (Ø 22.2 mm)
• Power supply: from 12 to 60 volts direct current
• Power consumption: 16 – 60 W
• Lamp: LED
• Lighting power: up to 220 lux
• Lateral visibility: yes
• Daytime lighting: yes
• Light modes: Dipped beam, curve light, high beam, daytime running light
• Light profiles: 4 (City, Road, Off-road, "My mode")
• Dust- and waterproof in accordance with IP67
• Dimensions: approx. 74 x 94 x 64 mm
• Weight: approx. 320 g

In the box:
• 1 B+M Briq-XL E headlight
• 1 handlebar mount
• 1 wired handlebar control unit 


Note:
The front light is compatible with a direct current power source (DC) of 12 to 60 volts. Some e-bikes can provide this, but NOT all do!
The light connection of your drive system must provide a rated power of at least 16 watts to operate the headlight.
For the exact voltage supply of your e-bike lighting system, please check beforehand with the respective manufacturer.
NOT suitable for dynamo!
NOT approved for e-bikes with a speed above 25 km/h or speed pedelecs!

Tip:
You can find a replacement handlebar mount under prod. code: 2351861.

Manufacturer: Busch & Müller KG, Auf dem Bamberg 1, 58540 Meinerzhagen, Germany, www.bumm.de/